Handheld Screwdriver with pneumatic drive

For nearly all industrial applications

  • uninfluenceably accurate
  • economical
  • robust
  • ergonomic
  • durable
  • quiet

The assortment of our handheld pneumatic screwdrivers in various designs caber the maximum torque range optimally. The compact air-drive assures the light weight of the tool. Our screwdrivers are extremely handy due to their slender, ergonomic design.

Its specially designed, high precision shut-off clutch allows torque repeatability of less than ≤3 % standard deviation.

When used under the correct conditions DEPRAG pneumatic screwdrivers with shut-off clutch conform with a Cmk value of ≥1.67 with a tolerance requirement of 15 % in relation to 6 Sigma according to ISO 5393. In other words a Cmk value of 1.67 means that there is a failure rate of only 0.6 per million screw assemblies.

The constructive design of the screwdriver for the industrial use and the high quality of our tools guarantee the highest up-time and a very longlife span.

NANOMAT

The screwdriver for extremely small torque values of 8 Nmm - 300 Nmm at speeds of 450 to 2,000 rpm.

The ideal solutions for micro assemblies in the medical industry, the watchmaking industry, optical industry, for the production of small consumer electronics and components, and for the use with precision engineering or model making.

MICROMAT

The basic solution for nearly all screwdriving tasks of 2 Ncm (3 inch ounces) to 70 Ncm (6.2 inch pounds).

This skinny screwdriver – hardly larger than a ballpoint pen – is designed for the use in a rugged industrial area and this driver series assures extreme high up-times. This special clutch design can reach an extreme high torque accuracy, in many cases below ≤3 % of the standard deviation, which is kept constant over several million of cycles.

MINIMAT

The basic solution for nearly all screwdriving tasks of 0.2 Nm to 65 Nm.

This handheld screwdriver is designed for the use in rugged industrial applications and it assures extreme high up-times. This special clutch design enables our screwdrivers to reach extreme high torque accuracy, in many cases below ≤3 % of the standard deviation, which remains constant over several million of cycles.

MICROMAT-F/MINIMAT-F

Pneumatic srewdrivers with additional function control.

If an error occurs, the controller fc20 locks-out the connected screwdriver. The subsequent assembly process can only be started if the previous task was completed properly. The correct number of tightened screws per assembly can also be controlled.

SENSOMAT

Test screwdriver with controlled clutch function for screw-joints with higher seating torque than driving torque.

The special execution for thread-tapping, thread-cutting or self-drilling fasteners! The SENSOMAT screwdriver first tightens the screw at full motor power and engages the shut-off clutch only shortly before the screwhead bottoms out.
A damaging overtightened of the screw is impossible!

The pneumatic, handheld Screwdriver for a Screwfeeder

Handheld Screwdrivers for automatic Screwfeeding

Nearly every screwdriver of the MICROMAT/MINIMAT series as well as the ERGOMAT and SENSOMAT series, can be combined with our screwfeeding machines.

Here, we can offer the wide product range of the screwdrivers that are perfectly adapted to our screwfeeders.

The Handheld Screwdrivers for Special Applications

Handheld Screwdrivers for Special Applications

Our program includes a variety of handheld screwdrivers for special applications, such as impulse screwdriver, impact screwdriver, VARIOMAT (drilling and screwdriving with one tool) for wood applications, RECYCLING screwdriver, slip-clutch screwdriver and flathead screwdriver.

For every application there is a suitable screwdriver!