[Stations] [Use Examples] [Feeding Systems] [Components] [Services]
Stationary Feeding Machines
for the feeding of:
- Screws
- Set-Screws
- Bolts
- Rivets
- Nuts
- Small components
- Washers
- O-rings
The necessary feeding systems are essential for the productivity and availability of automatic Assembly Machines. Originally designed for shaft-heavy screws, our new feeders are now able to feed screws of all types, with or without washers, threaded bolts, set-screws, pins, rivets, nuts, washers, o-rings, small components and other parts.
The high quality construction of our feeders, the use of high-alloy and heattreated steel for crucial components, together with a high screw quality, are the foundation for the high quality of our Assembly Machines.
Even if jamming occurs because of non-specific objects, numerous construction details are integrated to solve problems in seconds. Such as the quick accessibility of the separator or the tiltable and removeable housing.
feeders mainly consists of the feeder unit with housing, positioning system, the separator, air connection system and electronic connection. Basically, two different types of screwfeed principles are available:
Vibratory Bowl Feeder
For many years the three different design sizes of our Vibratory Bowl Feeders have been proven highly reliable. The vibratory magnet in connection with a spring-set and the integrated regulator generates a micro wave movement, which effectively transports the screws. For extremly high feed rate requirement, i.e. for the fast delivery up to four screws exits, a double spiral bowl with two outlets is available. To achieve maximum feedrate, the bowl should be filled to the half full level. The all-around enclosure reduces the noise level of the vibratory magnet.
Sword Feeder
Our new sword-feeder offers a real alternative to the Vibratory Bowl Feeder. A pressed-on segment lift-rail moves through the container which is filled with screws. This rail sorts and lifts the screws an than transport is done by gravity. Items, such as screws, bolts, etc. can be transported. Because the screws rest inthe container without being in motion, this type of feeder is extremly gentle to the parts. Therefore, this feeder allows the low wear and almost noise-less transport of hardware.
Linear Conveyors
Linear Conveyors are often used for automatic, stationary feeding applications. That type of conveyors fulfil several functions:
- reduces distance of movement
- allows for parts buffer
- enables an expension of the parts stream
Cannot find what you are looking for?
Just contact one of our global partners -
we will find the solution for your problem!
Catalog D3830 
PDF - Catalog: German