handheld, with a material cutting capacity up to 5mm (0.2in)
High cutting speed
Optimum curve workability
Lateral material discharge because of perfect deflector geometry
Extensive tool uptime
Metal shears are used in the entire sheetmetal industry, for the processing of metals in the automotive-, container-, and shipbuilding construction, as well as body shops. The shears can be used for either straight- or curved incisions.
Pestle-knives or so-called rotator-knives with four cutting edges are available for the shears 403-945 and 402-945. These pestles do not require re-sharpening.
The handle-shear 410-945 and the larger shear DS 35 + DS 42 possesses rotatorknives with two cutting edges each, which can be re-sharpened. All shears allow a full view of the work-surface and the incision for maximum operational safety.
The handle-shears 410-945 (with a 70mm / 2.76in overhang) – with a cutting direction crosswise to the motor axis – is specifically designed to fissure even or bent sheet metal products, up to a seam-width of maximum 70mm /2.76in. It is also well suited for pipes with a minimum diameter of 30mm / 1.18in.
Metal Shears
Catalog D4010 
PDF - Catalog : German