[Handheld Screwdrivers] [Stationary Screwdriving Spindles] [Selection program: InsertingTools] [Measuring Technique]
MINIMAT™-T
Torque range max. 5 - 12 Nm / 44 - 106 in.lbs
The Depth Stop Driver
for accurate depth assembly -
independent from Torque
Beside a multitude of screw assemblies which require a defined torque or even angle, there are assemblies where the goal is not torque but rather depth, such as:
- Assemblies of wood to wood, or any other base
- Fastening of drywall to frame
- Assemblies of Plastic Window-Profiles with internal metal support
For such assemblies we offer the DEPRAG Depth-Stop Driver with an integrated and adjustable finder. This finder activates the depth shut-off clutch and allows an exact and consistent screw depth. This model is available in straight- and pistolgrip design with maximum torque ranges of 5 - 12 Nm (44 - 106 in.lbs).
The straight screwdrivers allow the assembly of screws with right- and lefthand threads. Disassembly is possible only when sensing sleeve is taken off.
Pistol type screwdrivers allow the assembly and disassembly of screws with righthand thread. Assembly of screws with lefthand thread is not possible.
Cannot find what you are looking for?
Just contact one of our global partners -
we will find the solution for your problem!
Catalog D3470 
PDF - Catalog : German