E-SFM – Screwdriver Function Module with electronic stroke

Screwdriving system with a wide range of applications

The E-SFM features optimum qualities to react flexibly to complex screwdriving tasks, new fasteners and changing assembly requirements.

With appropriate adjustments to downforce, speed and position in the screwdriving application, cycle time is reduced and unnecessarily high stress on a component can be avoided.

The costs of replacement wear parts are reduced due to the precise, gentle engagement process.

  • Flexibility
  • Improved cycle time
  • One system - many screwdriving directions

Advantages that speak for the use of E-SFM

Flexibility
The Screwdriver Function Module with electronic stroke (E-SFM) has been optimally designed to react flexibly to complex screwdriving tasks, new fasteners and varying assembly requirements.


Precise parameter control
- force
- speed
- position


Process reliability
Avoid applying unnecessary stress to your component by optimally adjusting force and speed in your screwdriving application. A gentle engagement process will extend the life of your bit. 


Improved cycle time
Flexible positioning of the bit enables different processing steps to be combined with one another. This can improve the cycle time and increase the productivity of your application.


One system – many screwdriving directions
Whether downwards or upwards, horizontally or at a particular angle – the E-SFM can do the job without losing the fastener position. 


Integrated depth sensor
The E-SFM can be flexibly programmed and is therefore suitable for various screw heights.


Suitable for lightweight robots
Due to its low weight, the E-SFM is ideal for use in applications in conjunction with lightweight robots.


E-SFM Manager
Simple parameterisation software in responsive design.


 

Versions

Without feeding

if the fastener is pre-positioned

 

With feeding

Size G2:
Use with screws for a maximum screw head diameter (Dmax) of 14 mm to be processed.

Size G1:
Use with screws for a maximum screw head diameter (Dmax) of 10 mm.

Size G2:
Use with screws for a maximum screw head diameter (Dmax) of 14 mm to be processed.

Size G1:
Use with screws for a maximum screw head diameter (Dmax) of 10 mm.

Size G2:
Use with screws for a maximum screw head diameter (Dmax) of 14 mm to be processed.

Size G1:
Use with screws for a maximum screw head diameter (Dmax) of 10 mm.

Size G2:
Use with screws for a maximum screw head diameter (Dmax) of 14 mm to be processed.

Size G1:
Use with screws for a maximum screw head diameter (Dmax) of 10 mm.

Size G2:
Use with screws for a maximum screw head diameter (Dmax) of 14 mm to be processed.

Size G1:
Use with screws for a maximum screw head diameter (Dmax) of 10 mm.

With Pick-and-Place

if the fastener is fed using pick-and-place or via hose and precisely positioned using vacuum tube

Additional information about the E-SFM

In the training course "Screwdriver Function Module with electronic stroke (E-SFM)" you will learn how to set up sequences for various types of components.

E-SFM training course - Book now

All advantages and variants are presented in the E-SFM product catalog. Here you will also find all the technical data of the different variants of the E-SFM.

Product catalog E-SFM - Download now