The Screw Dispenser is the cost-effective entry into the automation of your production
You are looking for a quick solution to automate your assembly, but an automatic screw feeder is not feasible because of the low number of screws to be processed. For such a case, the DEPRAG screw presenter or screw dispenser is an ideal solution. Screw presenters are well-suited for the automatic presentation of screws to allow pickup with handheld or stationary screwdriver. With a screw dispenser, the screws are removed manually.
Our engineers will be happy to help you select the right screw presenter or screw dispenser for your individual assembly task. Contact us today and start your inquiry.
Product information – Screw Presenters for Manual and Stationary Screwdrivers
Screw Presenter for Manual Screwdriver
For the processing of screws with a shaft-diameter of 1 - 5 mm and a shaft-length of max. 25 mm.
Function of Screw Presenter:
- The pickup of the screw is done by a magnetic bit or vacuum suction.
- An operator can comfortably pickup the screw with a forward motion.
Screw Presenter for Stationary Screwdriver
For the processing of screws with a shaft-diameter of 1.4 - 5 mm and a shaft-length of max. 18 mm. This screw feeder is especially well suited for countersunk screws.
Function of Screw Presenter:
- A screw-separator sorts and presents each individual screw at a pickup position.
- The screw is removed using an upwards motion.
- A signal-output allows the control of the pickup position by a host controller.
Flexible
Easily exchangeable parts, such as adjustable cover-rails and bit-guides, allow the processing of screws with different measurements in the same screw presenter. With just a view steps, you can convert your screw presenter. Even screws with unfavorable measurements, which cannot be transported through a feedhose, can be presented with the screw presenters.
Operator friendly
The screw feeder can be used in a handheld application, a special feed-rail allows a precise and swift pick-up of the presented screw by either a magnetic bit or by vacuum.
Gentle transporting of screws
The transport of the screws occurs by two lift-segments in the screw-reservoir. The screws fall on top of a vibrating guide-rail, are accurately positioned by a brush and subsequently transported out of the reservoir. The procedure is especially gentle and quiet.
Stand-alone operation
The screw feeder is fully self-sufficient because of the integrated control. The sequence controller regulates the process reliable supply of screws, due to a light-barrier and micro-switch.
Compact design
Due to their compact design, multiple DEPRAG screw presenters can be arranged efficiently in limited work spaces.
Customized consulting
Would you like to know how a screw presenter can be used efficiently in your assembly process? Contact one of our engineers today to discuss your specific needs.
You will find all technical information on our product catalog Screw presenters D 3840. Contact our engineers today for a personalized consultation on the screw presenter.
Product information – Screw Dispenser
The screw dispenser is optimised for use in manual workstations. Supply of screws with a maximum head diameter of 12 mm and screw length of 30 mm (small version) or 60 mm (large version).
Functionality of Screw Dispenser:
- Screws are shot from the feeding system into the container of the screw dispenser.
- The operator reaches into the extraction area, an optical sensor detects the hand and activates the opening of a slide.
- Screws fall from the container into the operator’s hand.
Reliable processing
Screw dispenser minimises risk of error by supplying the correct number and type of screws.
Flexible
Can be combined with different DEPRAG feeding devices for the supply of up to three different screw types.
Technical cleanliness
In combination with the DEPRAG particle killer the screw dispenser achieves the best results.
Ergonomic
The screw dispenser supplies the correct screw to point of use.
Customized consulting
Would you like to know how a screw dispenser can be used efficiently in your assembly process? Contact one of our engineers today to discuss your specific needs.
You will find all technical information on our product catalog Screw Dispensers D 0066. Contact our engineers today for a personalized consultation on the Screw Dispenser.
View a list of our satisfied reference customers here, including medium-sized companies and international corporations. Contact us now and request more information about our screw dispensers. We look forward to working with you to develop a customized solution for your application using DEPRAG's high-performance screw dispensers.
Customised special versions
If required we also develop screw presenters and screw dispenser that are tailored to the requirements of a customer-specific application. Contact our technical consultants today to discuss your individual screw separation task.
An Example:
Particularly when the demands of industrial series production are very high, DEPRAG can offer extremely robust and durable customized designs. The screw-supply is done by a vibratory-bowl. A robust guide plate made from stainless steel allows the reliable and comfortable picking of the screw at a high mass production rate.
For a personal consultation, please contact our engineers.
Additional information about screw presenter and screw dispenser
Contact our engineers here if you have any questions about our products. We will be happy to provide you with an individual offer.
Download product catalogue now
More information about the screw presenter (D3840) can be found here.
Download product catalogue now
More information about the screw dispenser (D0066) can be found here.