The particular strength of the MICROMAT screwdriver – hardly larger than a ballpoint pen – is the very low torque capabilityof 2 Ncm (3 inch ounces) to 70 Ncm (6.2 inch pounds). This screwdriver is not only able to drive screws, but to actually adjust components.
The extraordinary constructive quality of the slender MICROMAT screwdriver and the capability to be used in a heavy industrial environment, assures extreme high up-times.
The MICROMAT achieves its high torque-accuracy through the proven principle of the DEPRAG disengagement- and shut-off clutch. This special clutch design enables our screwdrivers to reach extreme high torque accuracy, in many cases below ≤3 % of the standard deviation, which is kept constant over several million of cycles. DEPRAG pneumatic screwdrivers with a shut-off clutch operated at suitable surrounding conditions achieve a Cmk value of ≥1.67 with a tolerance requirement of 15 % in relation to 6 Sigma according to ISO 5393. A Cmk value of 1.67 means that there is a failure rate of only 0.6 per one million screw assemblies.
The ergonomic design of the housing allows a fatigue-proof operation at continued use.
Our ESD Screwdrivers are especially designed for the operation in electrostatic exposed areas and where an ESD-safe assembly is required (specifications according to EN 100 015).
The supplied conductive pressure hose allows a simple, direct and grounded connection, without the need for an additional cable-connection. Between the airhose for the tool and the main air-outlet an insulating connector with a resistance of 1 MΩ (available as an optional item) can be installed.
- Design execution: Straight
Torque range: 2 - 70 Ncm